Example snippet output of configuration file: Serial0/0 is up, line protocol is up.
2. show ip ospf neighbor – shows the IP neighbor’s and their priority, state, etc.
Example snippet output …
Neighbor ID |
PRI |
State |
Dead Time |
Address |
Interface |
192.168.45.1 |
1 |
FULL/DR |
00:00:36 |
10.0.0.1 |
Ethernet0 |
3. show running-config – Another way to verify your configuration.
Example snippet output of configuration file: ….
Interface Serial0/0
ip address 1.2.3.4 255.255.255.0
4. show vlan – Verifies VLAN information
Example snippet of VLAN information:
VLAN Name |
Status |
Mod/Ports Vlans |
1 Default |
active |
2/24 |
16 VLAN0016 |
active |
|
17 VLAN0017 |
Active |
3/1,3/4,3/8 |
Fragmentation Redirect Unreachable
————- ——– ———–
enabled enabled enabled
Destination Gateway RouteMask Flags Use Interface
————— ————— ———- —– ——– ———
172.20.0.0 172.20.26.70 0xffff0000 U 8 sc0
default default 0xff000000 UH 0 sl0
source: techtarget.com